Square Footage Calculator for Pavers & Sod | Calgary Landscaping Guide

Planning a patio, walkway, or new lawn in Calgary?
One of the most important steps before ordering pavers or sod is calculating the square footage of your space. Ordering too little can delay your project, while ordering too much wastes money. This quick guide will show you how to calculate square footage and help you plan your materials with confidence.

What Is Square Footage?

Square footage is simply the total area of a surface, measured in square feet (sq ft). Landscaping materials like pavers, patio stones, and sod are sold by the square foot, making this measurement essential for accurate ordering.

How to Calculate Square Footage (Simple Formula)

For rectangular areas, use this formula:

Length (ft) × Width (ft) = Square Feet

Example:
If your patio area is 20 ft long and 15 ft wide:
20 × 15 = 300 sq ft

Use Our Free Square Footage Calculator for Pavers & Sod

Instead of manually calculating every project, use our free online tool:

👉 Square Footage Calculator for Pavers & Sod
(link to your square footage calculator page)

Just enter your length and width, and the calculator will instantly give you the total square footage. You can also add a waste factor for pavers to account for cuts and breakage.

How Much Extra Should I Order?

For most landscaping projects in Calgary, we recommend adding:

• 5–10% extra for simple, straight patios or sod installations

• 10–15% extra for pavers with curves, patterns, or detailed cuts

This ensures you don’t run short during installation and helps avoid delays waiting for additional material.

Common Uses for Square Footage Calculations

• Patio stones and concrete pavers

• Walkways and garden paths

• Artificial turf and natural sod

• Outdoor seating areas

• Front yard and backyard landscaping projects

Order Pavers & Sod in Calgary

Once you know your square footage, you can confidently order pavers, patio stones, or sod for delivery in Calgary and surrounding areas. Accurate measurements make planning easier, reduce waste, and help keep your project on schedule.

Before placing your order, double-check your measurements with our calculator to make sure you’re ordering the right amount for your project.